The free PLM
The whole style on one record. Free, for good.
Spec, BOM, points of measure with a tolerance on every nominal, revisions with Δ marks, samples, quotes and the factory’s questions. Not a trial and not a cut-down tier: the record and every guest are free.
BOM
CF-DP22 · Talus 22L Daypack31 lines · 2 Δ since Rev B| CODE | MATERIAL | QTY |
|---|---|---|
| F01 | 210D Nylon Ripstop, PU2Body: front, gussets, back | 0.65 yd |
| F02 | 420D Nylon Oxford, PU2Base panel, strap top shell | Δ B0.220.24 yd |
| W01 | 25 mm Nylon WebbingShoulder straps | Δ B1.601.75 m |
| Z01 | #5 Nylon Coil Zipper ChainFront stash pocket | 0.20 m |
| H01 | Side-Release Buckle 25 mmSternum strap | 1 set |
Spec
A BOM your factory can quote from.
Fabrics, trims and hardware with code, placement and quantity per unit, and a column for every colourway. Materials, parts and POMs live next to it, so the spec is one place, not five spreadsheets.
- Colourways as columns: Basalt Black, Lichen Olive, Ember Rust
- Every value links to the page, cell or line it came from
- Filter by code, material or placement; edit any cell by hand
Free on every plan
BOM · colourways
3 colourwaysevery value cited| CODE | BLKBasalt Black | OLVLichen Olive | RSTEmber Rust | SRC |
|---|---|---|---|---|
| F01 | Basalt Black | Lichen Olive | Ember Rust | Talus_TP_v4.pdf · p6 |
| F02 | Black | Black | Black | Talus_TP_v4.pdf · p7 |
| W01 | Black | Black | Black | Talus_TP_v4.pdf · p8 |
| Z01 | Black | Lichen Olive | Black | Talus_TP_v4.pdf · p9 |
Points of measure and samples
A tolerance next to every nominal. PASS and FAIL worked out for you.
Each POM has its nominal and tolerance. When a sample lands, paste the factory’s readings or add them from a dim report: every POM is marked in or out of tolerance, and the comment back to the factory is drafted.
- Sample rounds side by side: P1, P2, the engineering build
- FAIL tints the row; NEAR flags what is close to the edge
- Readings from a factory upload land on the right round
Free on every plan
P1 · readings
Hengfeng Soft Goods · 4 Nov12 of 16 in tolerance| POM | SPEC | P1 | |
|---|---|---|---|
| ABody height | 480 ±10 | 482 | PASS |
| CBody width | 290 ±5 | 291 | PASS |
| DDepth at base | 150 ±5 | 154 | NEAR |
| LMain zip length | 720 ±10 | 716 | PASS |
| PStash pocket depth | 180 ±5 | 187 | FAIL |
Comment to the factory drafted: P is 7 mm deep, 2 mm over.
Revisions
Revisions with Δ marks, so the factory sees exactly what moved.
Work in a draft revision; release it when it is right. A released revision is frozen and is the only kind a factory ever sees. Every row changed since the last release carries a Δ with what it was.
- Drafts never go to factories
- History of every change, who made it and when
- Client sign-off on a revision, in the app
Free on every plan
Revisions
Talus 22L Daypackfactory sees Rev B- Rev 03Draft · 2 changesMaya Lindqvist · todayStudio only
- Rev BReleased · signed off by Jonas Brekke4 NovSigned off
- Rev AReleased · superseded21 Oct
Changed since Rev B
Δ 03F02Qty 0.22 → 0.24 yd
Δ 03W01Qty 1.60 → 1.75 m
Stage gates
Concept to Production, with the record saying what is left.
Each stage has a short checklist of facts the record can prove: a target FOB set, a quote within target, a sample in tolerance, the client’s sign-off. Gates advise, they don’t block; move on with checks unmet and the record keeps why.
Free on every plan
Next gate · Eng. build
Talus 22L Daypack2 of 4 met- Concept
- Development
- Sampling2/4
- Eng. build
- Pilot
- Production
- Latest sample round in toleranceP1: 4 of 16 POMs out
- Client signed off the current revisionRev B by Jonas Brekke
- Nothing waiting for review
- Every open question answered1 open
Costing and questions
Quotes against target, and questions that wait on someone.
Quotes sit against the target FOB and each other, with a should-cost to hold them to. Questions are asked on the line they are about, wait on whoever has to answer, and the answer is carried into the next revision.
- Which revision the factory says it costed
- Questions by who has to answer: you, the client or the factory
Free on every plan
Costing
FOB, USDR2 costed Rev B13Should-cost 14.90–16.1018
Questions
1 waiting on the factoryQ7Kelly Zhou · Hengfeng · on W01
Webbing in Lichen Olive or black on the olive colourway?
Answered questions are carried into the next revision.
The free PLM · questions
Questions
- What does Free include?
- The whole record: spec, BOM, POMs, colourways, revisions and release, stage gates, samples, costing, discussion, every production tool and every client and factory. Free covers 10 active styles and 2 studio editors; discontinued styles stay readable and stop counting.
- Can I bring my existing spreadsheets and packs?
- Yes. Type values in, or let AI read the packs, cost sheets and dim reports you already have; each value it finds is proposed with a citation, and nothing changes until you accept it.
- Who sees a draft?
- Only your studio. Clients see what you share with them; factories only ever see released revisions.
- Can I export everything?
- Yes, on any plan: tech packs as PDF, drawings as SVG, markers as DXF, and every document exactly as you uploaded it.
Also in Datum
One record, from the first sketch to the factory floor.
Everything below works on the same style. Nothing is retyped between them.
- Free · AI in creditsTech packsA drawn pack and its table on one artifact. Release a revision and send it in one step.See how it works
- CreditsAI add-onsRead the packs and quotes you have into proposals with citations. Priced before it runs.See how it works
- Credits3D modelsA to-scale model from a phone clip, its capacity in litres, and pictures in situations.See how it works
- FreeProduction toolsPatterns, nesting, should-cost, Cpk, line cards and strap strength on the record’s numbers.See how it works
- FreeFactories and clientsThey join free, by secure link or account, and see only what you send them.See how it works